REFURBISHED

Cisco AIR-PWRINJ-60RGD2 Ruggedized 60W Power Injector

In Stock
1 units available
SKU
AIR-PWRINJ-60RGD2-REFURBISHED
MPN
AIR-PWRINJ-60RGD2
USD $734.00
Refurbished The Cisco AIR-PWRINJ-60RGD2 is a 60-watt ruggedized outdoor power injector that combines 55-VDC power with data over a single Ethernet cable for outdoor Cisco Aironet access points, fitted with an unterminated 3-wire AC power cable (Global Version).
Australia Stock - Dispatches within 5 business days
Brand Cisco
Model AIR-PWRINJ-60RGD2
Device Type Ruggedized Outdoor PoE Power Injector
Output Voltage 55 V DC
Output Current 2 A
Output Power 60 W

Request a quote or add to cart — pricing available on enquiry for refurbished stock.

For international customers, please contact us for personalised support and assistance.

180-Days Warranty
Secure Checkout
Free Delivery US
Dispatch in 1–2 Business Days
AIR-PWRINJ-60RGD2
Cisco AIR-PWRINJ-60RGD2 Ruggedized 60W Power Injector REFURBISHED
Refurbished The Cisco AIR-PWRINJ-60RGD2 is a 60-watt ruggedized outdoor power injector that combines 55-VDC power with data over a single Ethernet cable for outdoor Cisco Aironet access points, fitted with an unterminated 3-wire AC power cable (Global Version).
The Cisco AIR-PWRINJ-60RGD2 is the global-version ruggedized outdoor power injector in Cisco's Aironet series. It combines 55-VDC power from an internal power supply with the data signal and sends both to the connected access point, providing up to 60 W over all four wire pairs of shielded, outdoor-rated Ethernet cable. It differs from the AIR-PWRINJ-60RGD1 in its AC connection: the RGD2 ships with an unterminated 3-wire AC power cable rather than a NEMA 5-15P plug. It can be pole- or wall-mounted in a vertical orientation for outdoor deployments.
Key Features
  • Ruggedized outdoor power injector rated up to 60 W
  • Combines 55-VDC power with data over a single Ethernet cable
  • 55 V DC, 2 A output
  • Delivers power over all four wire pairs of shielded outdoor-rated Ethernet cable
  • Global Version fitted with an unterminated 3-wire AC power cable
  • Pole- or wall-mountable, mounted vertically for safety compliance
  • Optional pole mount kit (AIR-PWRINJ-60-PMK=) supports poles up to 8 in. diameter
  • For installation in a Restricted Access Location
Documents

Product information is automatically compiled from trusted manufacturers and data providers. Please. report any errors.

General
BrandCisco
Part NumberAIR-PWRINJ-60RGD2
Device TypeRuggedized Outdoor PoE Power Injector
VersionGlobal Version (unterminated 3-wire AC cable)
Power
Output Voltage55 V DC
Output Current2 A
Output Power60 W
Power DeliveryOver all four wire pairs of shielded, outdoor-rated Ethernet cable
Ports
Network Technology10/100/1000 Ethernet
Cabling
Max AP-to-Switch Cable Length320 ft (100 m)
Wire Gauge26 AWG
Cable TypeShielded outdoor-rated CAT5e or higher, 0.20-0.35 in. diameter (AP side)
Physical
MountingPole/wall-mountable, vertical orientation; three mounting holes
Optional Pole Mount KitAIR-PWRINJ-60-PMK=
Compatibility
Supported Access PointsCisco Aironet 1530, 1550, and 1600 series access points and bridges

Write Your Own Review
You're reviewing:Cisco AIR-PWRINJ-60RGD2 Ruggedized 60W Power Injector
Your Rating

Common questions about the Cisco AIR-PWRINJ-60RGD2 Ruggedized 60W Power Injector.

The AIR-PWRINJ-60RGD1 is fitted with a NEMA 5-15P plug, while the AIR-PWRINJ-60RGD2 (Global Version) is fitted with an unterminated 3-wire AC power cable for connection to the branch circuit per local codes.
It provides up to 60 W at 55 V DC (2 A output) over all four wire pairs of shielded, outdoor-rated Ethernet cable.
It is designed for use with Cisco Aironet 1530, 1550, and 1600 series access points and bridges.

No documents available for this product yet.